Yes. Gutter Guard King Tas gutter mesh has 15-year warranty and we also provide a 15-year workmanship guarantee. Our product is manufactured in Australia and meets the strictest building standards and building codes available.
Installing gutter mesh will significantly reduce the volume and frequency of maintenance required for your gutters and roof. On sloped roofs, the mesh slope and over-the-gutter design will ensure that most leaves and debris are blown off the roof and mesh by the wind.
However, no gutter protection system is completely maintenance free, so you will still need to occasionally check and clean your mesh and gutters to remove debris caught on the edge of your mesh or saddles, fine debris that may have collected in your gutters, or leaves and debris that cannot “self-clean” due to your roof slope or gutter type.
Do not remove gutter mesh to carry out maintenance.
We recommend engaging a maintenance professional to clean your gutters and mesh as they have the right equipment, experience and training to do so safely. If you choose to maintain your gutters and mesh yourself, take appropriate safety precautions first.
Use a leaf blower to remove leaves and debris from on top of your roof and gutter mesh.
If there is any build-up of sediment or fine debris inside your gutters, use a normal pressure hose (through the mesh) to flush it out.
Keep in mind that gutter mesh on flat roofs and box gutters will require more frequent maintenance, as their location and/or pitch make it difficult for leaves and debris to blow off the roof and mesh. If you have trees that drop large volumes of debris, you may also need to conduct more frequent maintenance. Installing gutter mesh will significantly reduce the volume and frequency of maintenance required for your gutters and roof.
Yes. Our ember guard is specifically designed for bush-fire prone areas and is a custom made gutter guard solution that suits all roof types and is bush-fire compliant – conforms to AS3959-2009
A gutter guard such as gutter mesh is designed to keep leaves out of your gutters.
Ember guards are designed to stop burning embers getting into your home through gaps greater than 3mm. They can be made from a non-combustible mesh or perforated sheet with an aperture of 2mm or smaller.
Ember guards are mandatory for all new homes built in a bushfire-prone area with a BAL of 12.5 or higher. They’re used to “seal” any gaps greater than 3mm, such as gaps around your roof sheeting.
For homes in areas with a BAL of 12.5, 19 or 29, ember guards can be manufactured from corrosion-resistant steel, bronze or aluminium.
For homes in areas with a BAL of 40 or higher, only corrosion-resistant steel or bronze ember guards are allowed.
Yes. Gutter Guard King Tas gutter mesh when installed, seals off the guttering system so nothing should enter (unless they eat metal?). The only way ‘vermin’ can get in is up the inside of down-pipes.
That’s what we call ‘water sheeting’. With our diamond profile mesh it is designed for maximum water capture. To be honest, in extreme rain storms even without gutter guard mesh water will still over flow the gutters and run off to the ground (and that’s what they are designed to do anyway).
No. Our Gutter Guard mesh has a diamond profile which is specially designed to allow better water capture, meaning water easily enters the gutter and into your tank, providing clean water for your home.
Tile roofs all profiles, metal roofs (corrugated, trimdek, kliplok, spandek) for both residential and commercial properties.
Yes. We often quote for builders and are happy to quote off a plan if you send them through for us to review.
Credit card, direct debit, cash or bank transfer. We are also exploring afterpay options.
Each house needs to be quoted to give an exact fixed price. It depends on many factors like the roof type, low set or multiple levels, total length of the job, the type of gutter guard that is needed for your particular needs and more. Please just request a free measure and quote and we will be more than happy to give you an exact fixed price. In general price can range from $26 per lineal metre to $50 per lineal metre.
No. We bring everything we need and don’t need to use your power.
Yes. We clean your gutters for you just before we install the gutter mesh so you have leaf free gutters. We also offer a free solar panel clean if you have solar panels installed.
Each job is different. Generally most jobs are completed within a 1-2 days
Yes. Our aluminium gutter mesh is compatible for use with COLORBOND® steel roofs.
If you have any other questions? Fill out the form below and we'll be in contact.